background image

Check for parts online at 

www.getearthquake.com

 or call 800-345-6007 M-F 8-5

7

Operator's Manual

CS3814B, CS4116B Chainsaws

 CAUTION

HOT GASES ARE A NORMAL BY-PRODUCT OF A FUNC-

TIONING CATALYTIC CONVERTER. FOLLOW ALL SAFE-

TY INSTRUCTIONS TO PREVENT BURNS AND FIRES.
DO NOT ALTER/MODIFY ENGINE:
NEVER ALTER OR MODIFY THE ENGINE FROM THE 

FACTORY. SERIOUS INJURY OR DEATH MAY OCCUR IF 

ENGINE IS MODIFIED OR ALTERED.
WHEN WORKING ON OR REPLACING PARTS FOR THE 

ENGINE OR PRODUCT, YOU MUST ALWAYS DISCON-

NECT SPARK PLUG WIRE FROM THE SPARK PLUG AND 

KEEP IT AWAY FROM THE SPARK PLUG.

ENGINE SAFETY PRECAUTIONS

Warning Carbon Monoxide Poisoning
Engines give off carbon monoxide, an odorless, colorless, 

poisonous gas.  Carbon monoxide may be present even if you do 

not smell or see any engine exhaust. Breathing carbon monoxide 

can cause nausea, fainting or death, in addition to drowsiness, 

dizziness and confusion.  If you experience any of these 

symptoms, seek fresh air and medical attention immediately.  
If your product comes with a separate engine manual, be 

sure to read and follow all safety and warning precautions 

outlined there, in addition to any in this manual.
Preventing Carbon Monoxide Poisoning
• 

  Always start and run engine outdoors.  Do not start or run 

engine in an enclosed area, even if doors or windows are open.  

• 

  Never try to ventilate engine exhaust indoors. Carbon 

monoxide can reach dangerous levels very quickly.

• 

  Never run engine outdoors where exhaust fumes may be 

pulled into a building.

• 

  Never run engine outdoors in a poorly ventilated area where 

the exhaust fumes may be trapped and not easily taken 
away. (Examples include: in a large hole or areas where hills 
surround your working area.)

• 

  Never run engine in an enclosed or partially enclosed area. 

(Examples include: buildings that are enclosed on one or 
more sides, under tents, car ports or basements.)

• 

  Always run the engine with the exhaust and muffler pointed 

in the direction away from the operator.

• 

  Never point the exhaust muffler towards anyone. People 

should always be many feet away from the operation of the 
engine and its attachments.

• 

Do not change the engine governor settings or over-speed 
the engine.

 WARNING

ENGINES GIVE OFF CARBON MONOXIDE, AN ODOR-

LESS, COLORLESS, POISONOUS GAS.  CARBON MON-

OXIDE MAY BE PRESENT EVEN IF YOU DO NOT SMELL 

OR SEE ANY ENGINE EXHAUST. BREATHING CAR-

BON MONOXIDE CAN CAUSE NAUSEA, FAINTING OR 

DEATH, IN ADDITION TO DROWSINESS, DIZZINESS 

AND CONFUSION.  
IF YOU EXPERIENCE ANY OF THESE SYMPTOMS, SEEK 

FRESH AIR AND MEDICAL ATTENTION IMMEDIATELY.  

Gasoline Fires and Handling Fuel Safely

Use extra care in handling gasoline and other fuels. They are 

flammable and vapors are explosive.

• 

When storing extra fuel be sure that it is in an appropriate 
container and away from any fire hazards.

• 

Prevent fire and explosion caused by static electric discharge. 
Use only nonmetal, portable fuel containers approved by the 
Underwriter’s Laboratory (U.L.) or the American Society for 
Testing & Materials (ASTM).

• 

Always fill fuel tank outside in a well ventilated area. Never fill 
your fuel tank with fuel indoors. (Examples include: basement, 
garage, barn, shed, house, porch, etc.) Never fill tank near 
appliances with pilot lights, heaters, or other ignition sources.  

• 

If the fuel has to be drained, this should be done outdoors. 

The drained fuel should be stored in a container specifically 

designed for fuel storage or it should be disposed of carefully.

• 

Never remove the fuel cap or add fuel with the engine 

running. Stop engine and allow to cool before filling.

• 

Do not smoke.

• 

Never drain fuel from engine in an enclosed area.

• 

Always wipe up excess (spilled) fuel from engine before 

starting. Clean up spilled fuel immediately.  If fuel is spilled, 

do not start the engine but move product and fuel container 

from area. Clean up spilled fuel and allow to evaporate and 

dry after wiping and before starting.

• 

Allow fuel fumes/vapors to escape from the area before 

starting engine.

• 

Test the fuel cap for proper installation before starting and 

using engine.  

• 

Always run the engine with fuel cap properly installed on 

the engine.

• 

Never smoke while refilling engine fuel tank.

• 

Do not store engine with fuel in fuel tank indoors. Fuel and 

fuel vapors are highly explosive. 

Содержание CS3814B

































Отзывы: