EarthQuake CS3814B Скачать руководство пользователя

Страница: 3 / 32

Check for parts online at

www.getearthquake.com

or call 800-345-6007 M-F 8-5

Operator's Manual

CS3814B, CS4116B Chainsaws

WARNINGS AND SAFETY PRECAUTIONS

OPERATOR'S RESPONSIBILITY

Accurate assembly and safe and effective use of the machine is

the operator's responsibility.

•  Read and follow all safety instructions.
•  Carefully follow all assembly instructions.
•  Maintain the machine according to directions and schedule

included in this operator’s manual.

• Ensure that anyone who uses the machine is familiar with all

controls and safety precautions.

SPECIAL SAFETY MESSAGES

Your manual contains special messages to bring attention to

potential safety concerns, machine damage as well as helpful

operating and servicing information. Read all the information

carefully to avoid injury and machine damage.

NOTE: General information is given throughout the manual

that may help the operator in the operation or service of the

machine.

This symbol points out important safety instruc-

tions which if not followed could endanger your

personal safety.

BEFORE OPERATING ENGINE:

WARNING

READ ENTIRE OPERATING AND MAINTENANCE

INSTRUCTIONS FOR THIS PRODUCT. FAILURE TO

FOLLOW INSTRUCTIONS COULD RESULT IN SERIOUS

INJURY OR DEATH. OPERATE THE ENGINE ACCORDING

TO THE SAFETY INSTRUCTIONS OUTLINED HERE AND

INSERTED THROUGHOUT THE TEXT. ANYONE WHO

USES THIS PRODUCT MUST READ THE INSTRUCTIONS

AND BE FAMILIAR WITH THE CONTROLS.

Intended Use /

Foreseeable Misuse

This machine is a saw that utilizes a toothed, rotating chain

This product shall not be used for any other purpose.

WARNING

WARNING INDICATES A HAZARD WHICH, IF NOT

AVOIDED, COULD RESULT IN DEATH OR SERIOUS IN-

JURY AND/OR PROPERTY DAMAGE.

CAUTION

CAUTION INDICATES YOU CAN BE HURT OR YOUR

EQUIPMENT DAMAGED IF THE SAFETY INSTRUC-

TIONS THAT FOLLOW THIS SIGNAL WORD ARE NOT

OBEYED.

IMPORTANT

INDICATES HELPFUL INFORMATION FOR PROPER AS-

SEMBLY, OPERATION, OR MAINTENANCE OF YOUR

EQUIPMENT.

WARNING

CALIFORNIA PROPOSITION 65 WARNING
ENGINE EXHAUST FROM THIS PRODUCT CONTAINS

CHEMICALS KNOWN TO THE STATE OF CALIFORNIA

TO CAUSE CANCER, BIRTH DEFECTS, OR OTHER RE-

PRODUCTIVE HARM.

WARNING

YOU MUST READ, UNDERSTAND AND COMPLY WITH

ALL SAFETY AND OPERATING INSTRUCTIONS IN

THIS MANUAL BEFORE ATTEMPTING TO SETUP AND

OPERATE YOUR MACHINE.
FAILURE TO COMPLY WITH ALL SAFETY AND

OPERATING INSTRUCTIONS CAN RESULT IN LOSS OF

MACHINE CONTROL, SERIOUS PERSONAL INJURY TO

YOU AND/OR BYSTANDERS, AND RISK OF EQUIPMENT

AND PROPERTY DAMAGE. THE TRIANGLE IN THE TEXT

SIGNIFIES IMPORTANT CAUTIONS OR WARNINGS

WHICH MUST BE FOLLOWED.

Содержание CS3814B

































Результаты поиска

Содержание CS3814B

Отзывы:

Похожие инструкции для CS3814B

Бренды по названию

Популярные бренды

EarthQuake CS3814B, Руководство оператора

Результаты поиска

Содержание CS3814B

Отзывы:

Похожие инструкции для CS3814B

Бренды по названию

Популярные бренды