background image

Check for parts online at 

www.getearthquake.com

 or call 800-345-6007 M-F 8-5

29

Operator's Manual

CS3814B, CS4116B Chainsaws

Earthquake, Division of Ardisam, Inc.

1160 Eighth Avenue; P.O. Box 666

Cumberland, Wisconsin 54829

800-345-6007 · Fax (715) 822-4180

E-mail:  [email protected]

EARTHQUAKE CHAINSAWS

Warranty Terms and Conditions

PRODUCT WARRANTY: 1-YEAR LIMITED WARRANTY

Ardisam, Inc., a manufacturing company, warrants this 

EARTHQUAKE CHAINSAW

 to be free from defects in the 

material or workmanship for a period of one year from the date of purchase. During the one-year warranty of this 

product, Ardisam will furnish, at their discretion, parts and labor to correct any defect caused by faulty material 

or workmanship. Any unit used in a commercial application is covered for a period of 90 days after purchase. This 

warranty applies to the original owner with a proof of purchase and is not transferable. For the warranty to be 

valid, the product must be registered online, or the warranty card must be filled out and received by Ardisam, Inc., 

within 30 days of purchase.

ENGINE WARRANTY: 2-YEAR LIMITED EMISSIONS CONTROL WARRANTY

(SEE FEDERAL EMISSION CONTROL WARRANTY STATEMENT FOR DETAILS)

Ardisam, Inc., a manufacturing company warrants its Viper® Engines under a two-year limited emissions control 

warranty to be free from defects in materials and workmanship for the service life of the product not to exceed 

twenty-four consecutive months from the date of purchase for consumer applications. 

*These warranties apply only to products which have not been subjected to negligent use, misuse, alteration, ac-

cident, unauthorized parts, failure to use proper fuel and oil, or if repairs have been performed at non-authorized 

service centers. These warranties supersede all other warranties either expressed or implied and all other obliga-

tions or liabilities on our part. Ardisam, does not assume, and does not authorize any other person to assume for 

us, any liability in connection with the sale of our products. 

To be at “No Charge,” warranty work must be sent 

directly to Ardisam, Inc. or one of our authorized service centers and performed by them

. To obtain warranty 

service and/or replacement instructions, contact our customer service department. Ardisam, Inc. will cover the 

cost of shipping only for purchasers located more than 100 miles from an Ardisam authorized repair center if it is 

determined that warranted repair is indeed necessary. If you choose to ship your product to Ardisam for warranty 

repair, you must first have prior approval from Ardisam by calling our customer service department for a return 

material authorization number (RMA#). Under these circumstances, all items must be shipped prepaid. Ardisam 

will at no charge, repair or replace, at their discretion, any defective part which falls under the conditions stated 

above. Ardisam retains the right to change models, specifications and price without notice. 

Содержание CS3814B

































Отзывы: