EarthQuake CS3814B Скачать руководство пользователя страница 15

Страница: 15 / 32

Check for parts online at

www.getearthquake.com

or call 800-345-6007 M-F 8-5

Operator's Manual

CS3814B, CS4116B Chainsaws

FILLING THE BAR AND CHAIN OIL RESERVOIR

1. While the engine is cool for re-fueling, clean debris from area

around the bar and chain oil cap.

2. Loosen oil cap slowly.
3. Carefully add bar and chain oil without spilling.
4. Do not fill oil reservoir completely full; allow space for oil to

expand.

WARNING

CHAIN BRAKE WILL NOT PREVENT A KICKBACK. IN THE

EVENT OF A KICKBACK, THE CHAIN BRAKE IS DESIGNED

TO REDUCE THE RISK OF INJURY TO THE OPERATOR.

WARNING

DO NOT MODIFY OR ALTER THE FUNCTIONALITY OF

THE THROTTLE INTERLOCK IN ANY WAY. DOING SO

WILL ALLOW ACCIDENTAL ENGAGEMENT OF THE

THROTTLE WHICH WILL RESULT AN UNEXPECTED

OPERATION OF THE SAW CHAIN.

WARNING

CHAIN CATCHER IS INTENDED TO PREVENT INJURY

IN THE EVENT OF A CHAIN MALFUNCTION. NEVER

OPERATE A SAW WITHOUT A CHAIN CATCHER.

REPLACE IF MISSING OR BADLY DAMAGED.

OPERATION

FILLING FUEL TANK

1. Shut off engine and allow engine to completely cool before

refilling the fuel tank.

2. Move to a well-ventilated area, outdoors, away from flames

and sparks.

3.  Clean debris from area around the fuel cap.
4.  Loosen fuel cap slowly.
5.  Carefully add fuel without spilling.

Note: Use a minimum 87 octane gasoline with NO ethanol

content (50:1 mixture). If using an ethanol blended fuel,

a fuel stabilizer, mixed to manufacturer specifications, is

recommended.

6. Do not fill gas tank completely full; allow space for fuel to

expand.

7. Immediately replace fuel cap and tighten. Wipe off spilled

fuel and allow to dry before starting engine.

The saw chain needs to stay lubricated during operation of

the unit.

Aside from the fuel reservoir on the chainsaw, there

is also a bar and chain oil reservoir. Use only oil that has been

designed specifically for use with chainsaws. Bar and chain oil

has chemical properties which allow it to adhere to the saw

chain and provide better lubrication while the chain is in motion.

The saw is equipped with an adjustable automatic oiler

. The

oiler and oil reservoir are designed such that a full tank of fuel

will run out before a full tank of oil. This ensures that the bar

and chain will receive a constant flow of oil during operation.

Always top off your oil reservoir when re-fueling.

To adjust the automatic oiler you must first locate the oiler screw

positioned on the under-side of the chainsaw

(SEE FIGURE 3)

Turn the screw counter-clockwise to increase and clockwise to

decrease oil flow. The screw location does vary slightly between

models.

NOTE: It is recommended for the use of your chainsaw to

leave the automatic oiler on full flow.

FIGURE 3

adjustable oiler screw

5. Replace cap and tighten. Wipe off any spilled oil before starting

engine.

Note: Do not use waste or recycled oil. Waste or recycled oil

could contain contaminants which will cause damage to the

oil pump.

Содержание CS3814B

































Результаты поиска

Содержание CS3814B

Отзывы:

Похожие инструкции для CS3814B

Бренды по названию

Популярные бренды

EarthQuake CS3814B, Руководство оператора

Результаты поиска

Содержание CS3814B

Отзывы:

Похожие инструкции для CS3814B

Бренды по названию

Популярные бренды