background image

Check for parts online at 

www.getearthquake.com

 or call 800-345-6007 M-F 8-5

30

Operator's Manual

CS3814B, CS4116B Chainsaws

FEDERAL EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The United States Environmental Protection Agency (EPA), together 

with Ardisam, Inc. (Ardisam), are pleased to explain the Emission 

Control System Warranty on your small off-road engine (SORE). New 

small off-road engines must be designed, built and equipped to meet 

stringent anti-smog standards the federal government. Ardisam will 

warrant the emission control system on your engine for the periods of 

time listed below provided there has been no abuse, neglect, modifi-

cation or improper maintenance of your engine.
The emission control system includes all components whose failure 

would increase the emissions of any regulated pollutant. These 

components are listed in the emission-related parts list located in a 

subsequent section of this emissions warranty statement. Ardisam 

will repair your engine at no cost to you for diagnosis, replacement 

parts and labor, should a warrantable condition occur. 

MANUFACTURER’S WARRANTY COVERAGE:

The emission control system is warranted for two years. If, during such 

warranty period, any emission-related part on your engine is found to 

be defective in materials or workmanship, repairs or replacement will 

be performed by a Ardisam Authorized Warranty Service Facility.

PURCHASER’S/OWNER’S WARRANTY RESPONSIBILITIES:

As the SORE purchaser/owner, you are responsible for the comple-

tion of all required maintenance as listed in your factory supplied 

Manual(s). For warranty purposes, Ardisam recommends that you 

retain all receipts covering maintenance on your SORE. However, 

Ardisam cannot deny warranty solely because of the lack of receipts 

or for your failure to ensure the completion of all scheduled mainte-

nance.
As the SORE purchaser/owner, you should, however, be aware that 

Ardisam may deny any and/or all warranty coverage or responsibility 

if your SORE or a part/component thereof, has failed due to abuse, 

neglect, improper maintenance or modifications, or the use of coun-

terfeit and/or “grey market” parts not made, supplied or approved by 

Ardisam.
You are responsible for presenting your SORE to an Ardisam Autho-

rized Warranty Service Facility as soon as a problem occurs. The war-

ranty repairs should be completed in a reasonable amount of time, 

not to exceed 30 days.
Warranty service can be arranged by contacting either your selling 

dealer or a Ardisam Authorized Warranty Service Facility. To locate the 

Ardisam Authorized Warranty Service Facility nearest you, call our free 

number:

800-345-6007

IMPORTANT NOTE:

 This warranty statement explains your rights and 

obligations under the Emission Control System Warranty (ECS War-

ranty), which is provided to you by Ardisam pursuant to federal law. 

See also the Ardisam “Product Warranty” (non-emission warranties), 

which is enclosed herewith on a separate sheet or located in addi-

tional materials accompanying this product. The ECS Warranty applies 

only to the emission control system of your new engine. If there is 

any conflict in terms between the ECS Warranty and the Ardisam 

Warranty, the ECS Warranty shall apply except in circumstances where 

the Ardisam Warranty may provide a longer warranty period. Both the 

ECS Warranty and the Ardisam Warranty describe important rights 

and obligations with respect to your new engine.
Warranty service can be performed only by an Ardisam Authorized 

Warranty Service Facility. When requesting warranty service, evi-

dence must be presented showing the date of the sale to the original 

purchaser/owner. Ardisam will not be responsible for any and/or all 

damages or losses incurred while the engine is being transported/

shipped for inspection or warranty repairs.
IF YOU HAVE ANY QUESTIONS REGARDING YOUR WARRANTY RIGHTS 

AND RESPONSIBILITIES, YOU SHOULD CONTACT ARDISAM AT THE 

FOLLOWING ADDRESS:

Ardisam, Inc.

1160 Eighth Avenue; P.O. Box 666

Cumberland, Wisconsin 54829

800-345-6007 · Fax (715) 822-4180

E-mail: [email protected]

II. EMISSION CONTROL SYSTEM WARRANTY

Emission Control System Warranty (ECS Warranty) for equipment us-

ing small off-road engines:
(a) Applicability: This warranty shall apply to equipment that uses 

small off-road engines. The ECS Warranty Period shall begin on the 

date the new engine or equipment is purchased by/delivered to its 

original, end-use purchaser/owner and shall continue for 24 consecu-

tive months thereafter.
(b) General Emissions Warranty Coverage: Ardisam warrants to the 

original, end-use purchaser/owner of the new engine or equipment 

and to each subsequent purchaser/owner that each of its engines is...

(1) Designed, built and equipped so as to conform with all appli-

cable regulations adopted by the EPA pursuant to their respective 

authority, and 
(2) Free from defects in materials and workmanship which, at 

any time during the ECS Warranty Period, may cause a warranted 

emissions-related part to fail to be identical in all material respects 

to the part as described in the engine manufacturer’s application 

for certification.

The ECS Warranty only pertains to emissions-related parts on your 

engine, as follows:

(1) Any warranted, emissions-related parts that are not scheduled 

for replacement as required maintenance in the Maintenance 

Schedule (located in the section of the Manual(s) pertaining to 

maintenance) shall be warranted for the ECS Warranty Period. If any 

such part fails during the ECS Warranty Period, it shall be repaired 

or replaced by Ardisam according to Subsection (4) below. Any 

such part repaired or replaced under the ECS Warranty shall be 

warranted for the remainder of the ECS Warranty Period.

Содержание CS3814B

































Отзывы: