Earth Klear Sky 400, Руководство пользователя, Страница: 11 / 57

11
M
AINTENANCE
The front wood door has two “U” bolts that are adjustable. If you feel the door is not closing tightly or
may be too tight, loosen the bolts with the door open and tighten or loosen the bolts as necessary.
It is important that the water is checked daily, especially after the first start up. We also require that
you have your water tested to maintain proper ph and necessary chemicals for your water conditions.
At the end of the season it is important to have all necessary chemical in the water if you will be
leaving the furnace full of water over the summer. Earth will pay for the water test for the 1
st
7 years
of ownership.
You should clean your ashes out at least once a week, and as needed. The ash and coal bed should
be no higher than the bottom of the unit’s door as it will interfere with the blower and airflow. A flat
shovel works well for this job. We recommend using a metal container of some kind to put the ashes
in when removing them. Rake coals to the back of the furnace, remove the ashes, and then rake
coals back towards the front of the unit. At the end of the season, be sure to completely clean the
ash box. Ashes combined with moisture are very corrosive and can eat through metal. Ash or coal
corrosion is NOT covered under warranty.
You may use a chimney cap with the furnace to keep rain out. It is recommended that you at least
cover the chimney during the summer months when the furnace is not in use to keep rain, birds and
other insects from getting in the furnace.
The light, pump, and blower can all be visually inspected and should only need replacing when they
quit working. They should last for several years however conditions are different at every site and
longevity may vary based on your climate and maintenance.
Periodically check that the combustion blower tube, flame baffle, and chimney are not restricted by
debris (creosote, ash, etc.), and that door seal provides air-tight seal when shut to ensure proper use
of air controls.