7
BASIC STRUCTURE OF PRODUCT
This product is a two-post, dual cylinder, chain-over-hydraulic lift which uses steel cables for
equalization. The main components are the towers, lifting carriages, swing arms, cylinders,
chains, cables and power unit. Arms and carriages have locking mechanisms for simple and safe
operation.
Depressing the switch on the power unit raises the lift. Releasing the switch stops the lift. Lift
should always be settled on the carriage locking mechanisms. To lower the lift, simply raise the
carriages up off the locks, pull on the small ringed cables below both carriages to disengage the
locks, and depress the lowering handle.
Arms rotate and telescope for easy use. Adapters are included for raising the height of the base-
pad at the end of the arm. Swing arm locks automatically engage as the carriages rise, and
disengage once they are lowered to the floor.
Style
Symmetric
Lifting capacity
9,000 lbs.
Overall height
111 1/2"
Overall width (outside of base plate)
135"
Width (outside of columns)
125"
Cover height
1 3/4"
Inside columns
110 1/2"
Front arm min reach
32"
Front arm max reach
48"
Rear arm min reach
32"
Rear arm max reach
48"
Min pad height
4"
Rise
70"
Lift height max (pad only)
74 1/2"
Lift height max (with adapters)
77 1/2"
Drive-thru clearance
101”
Motor
2HP 220VAC
Time to full rise ( NO LOAD)
45 seconds (220 PU)
Max load per arm
2,250 lbs.
Shipping Weight
1,500 lbs.
Shipping Dimensions
L 116 " x W 21" H 44"
