21
STEP 12
Wiring the Lift
FINAL ELECTRICAL CONNECTION MUST BE MADE
BY A CERTIFIED ELECTRICIAN.
1] The power unit may or may not come with a “pig-tail” already attached and wired to the motor.
It is recommended that a twist-lock connection be installed at this pig-tail as an emergency
disconnect (Fig. 14).
(Fig. 14)
2] Wiring may vary, depending on the Power Unit. The typical connection is L1 to black power
unit wire, L2 to white power unit wire, Neutral and Ground both connect to the chassis of the
power unit. (Refer to wiring diagram on the inside of your switch cover for confirmation.)
DO NOT ASSUME WIRING COLORS OR LABELS ARE ACCURATE.
VERIFY THE WIRING INSIDE SWITCH BOX OF POWER UNIT IS ROUTED CORRECTLY TO
PROVIDE 220v/20@/SINGLE PHASE TO THE SWITCH AND MOTOR,
WITH PROPER GROUND.
