Product Manual RCUXXYY
EAE KNX Room Control Unit
RCUXXYY PM R1.0
©
EAE Technology
www.eaetechnology.com
Page 25 / 80
4.2.2
a - Switch Dim Sensor
You can use the corresponding input to switch the light on or off or dim it. When dimming, dimming
up or dimming down is carried out via the 4 bit dimming object; the parameters for the dimming
steps can be set. In addition, you can also transmit the corresponding dimming step cyclically for a
period of time that can be set as required.
Connected contact type
normally closed
*normally open
The contact type of the push button attached to the channel is adjusted here.
Dimming functionality
Dimming and switching
*Only dimming
▪
This parameter is select “Dimming and switching”;
If the dimming actuator was switched on by a short push button action, then it is dimmed
brighter/darker by the first long push button action.
▪
This parameter is select “Only dimming”;
The
advantage of the “Only dimming” function is that no distinction is between short and long
actuation. It is not necessary to wait for a long actuation.
Reaction on short operation
ON
OFF
*TOGGLE
no reaction
This parameter is visible if there is sele
cted “Dimming and switching” operation.
When the push button is pressed briefly the value currently stored in the switching object. An ON or
OFF telegram is only generated when the push button is released. (Falling edge)
Reaction on long operation
*Dim BRIGHTER
Dim DARKER
