Product Manual RCUXXYY
EAE KNX Room Control Unit
RCUXXYY PM R1.0
©
EAE Technology
www.eaetechnology.com
Page 28 / 80
With below functions, you must set the parameters for a second key (second input) with the
corresponding settings for the shutter movement in the opposite direction.
▪
2 button, standard
Short operation
Stop / lamella adjustment
The stop/lamella adjustment object is adjustment of the lamella UP or
DOWN. In additional it stops a running movement of the shutter.
Long operation
This action is for moving the chosen direction shutter. Movement
direction is choosing on parameter move up or moves down.
▪
2 switch operation, moving(shutter)
Start of operation
This property is for moving only shutters up or down.
While button is pressing, operation is continuing. This action is moving
th
e shutter “move up” or “move down”.
End of operation
When button releases, operation stop.
“Stop/ Lamella ad
j.
UP” or “Stop/ Lamella adj
.
DOWN” command is
send than movement stopped.
You should use the property with two switches.
▪
2 switch operation, moving(shutter)
On operation
The property object “Shutter” is choose and performs the up‐ and
down‐movement of the shutter.
The direction of movement depends to the parameters. When the
button pressed firstly, than shutter move in direction that it was
programmed. Second time button is pressed shutter stop command is
sent such as STOP/Lamella adj. UP or STOP/Lamella adj. DOWN.
1)
Shutter MOVE UP -> STOP/Lamella UP
2)
Shutter MOVE DOWN -> STOP/Lamella DOWN
▪
2 button, stepping
On operation
Stop / lamella adjustment
The stop/lamella adjustment object is adjustment of the lamella UP or
DOWN. Lamella move direction chooses on the parameters.
Connected contact type
normally closed
*normally open
The contact type of the push button attached to the channel is adjusted here.
Reaction on short operation
*STOP/lamella UP
STOP/lamella DOWN
This parameter is visible if there is distinction between short and long operation.
Stop/step lamella adjustment parameter. This parameter object stops shutter movement.
Reaction on long operation
MOVE UP
*MOVE DOWN
Distinction between short and long;
This parameter use for choose shutter movement direction.
