EAE EE-6605B.PD, Инструкция по установке, эксплуатации и ремонту

Страница: 14 / 35

Installation, Operation and Parts Manual
EE-6605B.PD
14
4.4 Items to be checked after installation.
S/N Check items YES NO
1 Screw torque of expansion bolts : 60 ‐ 80N•m;
2 Rising speed ≥ 20mm/s;
3 Noise with rated load ≤ 75db;
4 Grounding resistance: not bigger than 4 Ω ;
5 Height difference of the two platform ≤ 5mm;
6 Mechanical locks are robust and synchronized when running with rated load ;
7 If the control button works as “hold to run”?
8 If limit switches work well?
9 If grounding wire is connected?
10 If the lift rises and lowers smoothly?
11 If there is no abnormal noise during running with rated load?
12 If there is no oil leakage when running with rated load?
13 If there is no air leakage when running with rated load?
14 If expansion bolts, nuts or circlips are well secured?
15 If max lifting height is 1750mm?
16 If safety advices, name plate and logos are clear?
OPERATION INSTRUCTIONS
5.1 Precautions
5.1.1
Check all connections of oil hose. Only when there is no leakage, the lift can start work.
5.1.2
The lift, if its safety device malfunctions, shall not be used.
5.1.3
It shall not lift or lower an automobile if its center of gravity is not positioned midw
ay
of the runways.
5.1.4
Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
5.1.5
When runways being raised to the desired height, switch off the power and lock the button with a padlock to prevent any wrong
operation done by unconcerned people.
5.1.6
Make sure the safety lock of the lift is engaged before start working under the vehicle and no people under the vehicle during lifting
and lowering process.