EAE EE-6605B.PD, Инструкция по установке, эксплуатации и ремонту

Страница: 11 / 35

Installation, Operation and Parts Manual
EE-6605B.PD
11
INSTALLATION INSTRUCTIONS
4.1 Preparations before installation
4.1.1 Space requirements.
Refer to 3.3 for the dimensions of the lift. There must also be a clearance of at least 1 meter between the lifting platform and fixed
elements (e.g. wall) in all lifting positions. There must be sufficient space at the ends of the lifting platform for driving vehicles on and off.
To stop vehicles colliding with the ceiling, it is advisable to fit an overhead light barrier in low ceiling buildings.
4.1.2 Foundations and connections
The user must have the following work performed before erecting the lift.
Attention: electrical system connection must be done by licensed technicians.
Requirements for power supply cable of the installation site: at least 2.5mm
2
wire core for 3Ph power and 4.0mm
2
wire core for 1Ph
power.

Construction of the foundation following consultation with the manufacturer’s customer service or an authorized service agent.

Routing of the wiring to the installation location. The user must provide fuse protection for the connection.

Routing of the compressed air connection to the installation location.

Refer also to the corresponding information in the operation instructions.
4.1.3 Foundations preparations
Please refer to Annex 1 for floor dimensions.
4.1.4 Tools and equipments needed for installation
Tool Name Specification Qty
Electrical drill With D16 and D18 drill bit. 1
Open spanner D17 ‐ 19mm 2
Adjustable spanner bigger than D30mm 1
Cross socket screw driver PH2 1
Quick spanner handle adapter/ Ratchet 1
Socket spanner D24mm 1
Levelling device 1
Hammer 10 pounds 1
Truck lift Capacity more than 2500KG 1
Lifting string Capacity, 1000KG 2
Lifting string Capacity, 2000KG 1
Torque spanner MD400 1