EAE EE-6214EKZ, Инструкция по установке, эксплуатации и ремонту

Страница: 12 / 38

Installation, Operation and Parts Manual
EE-6214EKZ
12
INSTALLATION INSTRUCTIONS
4.1 Preparations before installation
4.1.1 Space requirements.
Indoor installation only. Refer to 3.4 for the dimensions of the lift. There must also be a clearance of at least 1 meter between the
lifting platform and fixed elements (e.g. wall) in all lifting positions. There must be sufficient space for driving vehicles on and off.
4.1.2 Foundations and connections
The user must have the following work performed before erecting the lift.

Construction of the foundation following consultation with the manufacturer’s customer service or an authorized service agent.
Routing of the wiring to the installation location. The user must provide fuse protection for the connection. Electrical system
connection must be done by a qualified electrician. Requirements for power supply cable of the installation site: at least 2.5mm 2 wire
core for 3Ph power and 4.0mm
2
wire core for 1Ph power.

Refer also to the corresponding information on the name plate and in the operation instructions. Before doing electrical connection,
make sure the lift is electrically adapt to the local power supply.

Foundations preparations (see Annex 1, floor plan)
To ensure stability and safety under load, the lift shall be installed with the base frame being in direct and firm contact with the concrete
foundation. Don't attempt to fix the base frame directly onto floor with ceramic and other decorated surfaces otherwise you put the lift
into a very dangerous situation.
C25 concrete foundation with a minimum thickness of 200mm.
Surface under base of the post: Horizontal and even (Gradients max. 0.5 %).
Newly built concrete ground must be older than 20days.
4.1.4 Tools and equipment needed for installation
Tool name Specification Quantity needed
Electrical drill With D18 drill bit. 1
Open spanner D17-19mm 2
Adjustable spanner bigger than D30mm 1
Cross socket screw driver PH2 1
Quick spanner handle adapter/ Ratchet REB-310 1
Socket spanner D24mm 1
Levelling device 1mm accuracy 1
Hammer 10 pounds 1
Truck lift Capacity more than1000 kg 1
Lifting string Capacity, 1000 kg 2
Torque spanner MD400 1