EAE EE-612E, Инструкция по установке, эксплуатации и ремонту, Страница: 22 / 41

Installation, Operation and Parts Manual
EE-612E
22
Turn on the power switch
Press UP button
Motor drives the gear pump work
Cylinder piston drives the chain work
Chain drives the carriage rise
The lift is raised
Start
Start
Turn on the power switch
Press the DOWN button
The lift is lowered
OPERATION INSTRUCTIONS
5.1 Precautions
5.1.1
Check all connections of oil hose. Only when there is no leakage, the lift can start work.
5.1.2
The lift, if its safety device malfunctions, shall not be used.
5.1.3
It shall not lift or lower an automobile if its center of gravity is not positioned midw
ay
of the runways. Otherwise, we as well as
our dealers will not bear any responsibility for any consequence resulted thereby.
5.1.4
Operators and other personnel concerned should stand in a safety area during lifting and lowering process.
5.1.5
When runways being raised to the desired height, switch off the power at once to lock the button with a padlock to prevent
any wrong operation done by unconcerned people.
5.1.6
Make sure the safety lock of the lift is engaged before start working under the vehicle and no people under the vehicle during
lifting and lowering process.
5.2 Flow chart for operation
Raising
Lowering