EAE EE-612E, Инструкция по установке, эксплуатации и ремонту, Страница: 11 / 41

Installation, Operation and Parts Manual
EE-612E
11
3.5 Technical data
Model 612E ‐ V2
Rated load capacity 2500KG
Rated motor capacity 2.2KW
Voltage 220V/380V
Full rise height 1870mm
Full lowered height 115±5mm
Full rise time with load
≤
50s
Full lowering time with load
≤
50s
Max working hydraulic pressure 18MPa
Min working hydraulic pressure 14MPa
Oil Volume 8L
INSTALLATION INSTRUCTIONS
4.1 Preparations before installation
4.1.1 Space requirements.
Refer to 3.3 for the dimensions of the lift. There must also be a clearance of at least 1 meter between the lifting platform and fixed
elements (e.g. wall) in all lifting positions. There must be sufficient space at the ends of the lifting platform for driving vehicles on
and off.
To stop vehicles colliding with the ceiling, it is advisable to fit an overhead light barrier in low ceiling buildings.
4.1.2 Foundations and connections
The user must have the following work performed before erecting the lift.

Construction of the foundation following consultation with the manufacturer’s customer service or an authorized service
agent.

Routing of the wiring to the installation location. The user must provide fuse protection for the connection.
Refer also to the corresponding information in the operation instructions.
4.1.3 Foundations preparations

C20/25 concrete base with strength more than 3000psi, tolerance of flatness less than 5mm and minimum thickness of 200mm.
In addition, newly built concrete ground must be older than 20days.