ELiiXA® UC8/UC4
42
Eliixa_Color–revF 04/11
e2v semiconductors SAS 2011
The default Matrix are the following
:
¾
For the RGB+Nir Versions:
1 0 0 -1
0 1 0 -1
To remove the Nir Infra Red component of each color and which has
0 0 1 -1
been measured with the Nir Line
0
0
0
1
Some values of the RGB Matrix will be proposed in
Appendix C for different type of light source.
The Sum of the 3 parameters of the RGB Matrix on the same line must be equal to 1 in order to
avoid changing the White Balance.
¾
For the RGB or RGB+Mono Versions:
1 0 0 0
0 1 0 0
Not Available for the RGB Version.
0 0 1 0
0 0 0 1
Some values of the RGB Matrix will be proposed in
Appendix C for different type of light source.
•
Color Matrix Enable
:
Activates the color Matrix
.
This command is available in the CommCam “Color
Management” section :
Ö
Read function : “
r come
” : Returns the Color matrix Status (0 if disabled, 1 if enabled)
Ö
Write function :
“
w come 1
” : Enable the color Matrix.
“
w come 0
” : Disable the color Matrix
•
Color Matrix coefficients
:
To set each of the Color Matrix coefficients
.
This command is available in
the CommCam “Color Management / Manual Matrix” section :
