E-Z-GO RXV GASOLINE, Руководство по обслуживанию и ремонту

Страница: 143 / 190

REAR SUSPENSION
Page N-3
Repair and Service Manual
Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notices, Cautions and Warnings.
B
B
seize compound to the large flanged urethane bush-
ings (26).
8. Install the rubber bushing (6) or the large flanged ure-
thane bushings (26) and spacer (25) in the end of the
leaf spring (16) and place the leaf spring in the for-
ward mounting bracket.
9. Install the hex head bolt (7) and nut (4) to secure the
forward end of the leaf spring in the bracket.
10. Apply a commercially available anti-seize compound
to the flanged urethane bushings (13).
11. Install one set of the flanged urethane bushings (13)
and spacer (14) in the rear frame mounting holes.
12. Position the shackle plates (12) over the bushings and
install the hex head bolt (15) and nut (11).
13. Install the remaining pair of flanged urethane bushings
(13) and spacer (14) in the leaf spring (16). Position
the leaf spring between the shackle plates (12) and
install the hex head bolt (15) and nut (11).
14. Align the pin on the leaf spring (16) with the hole in the
axle bracket and install the leaf spring plate (2) on to
the U-bolt (1). Secure plate in place with two hex nuts
(3).
15. Torque all hardware as specified making sure that the
leaf spring pin remains aligned with the holes in the
axle mounting bracket and the leaf spring mounting
plate.
Removal and installation of the leaf spring is the same
for both sides of the vehicle.
Replace any worn or damaged hardware with new as
required.
Fig. 3 Rear Leaf Spring
ITEM TORQUE SPECIFICATION
3 22 - 26 ft. lbs. (30 - 35 Nm)
4, 11 13 - 15 ft. lbs (17 - 21 Nm)
4
16
26
6
7
25
2
3
11
12
13
14
13
12
13
14
13
1
15