090000938
-
NVR Serie BU
-
Quick Guide
25
•STEP 6
•STEP 7
Re-assemble the NVR components properly.
NOTE: in case of installation of a single HDD, the fan connector can be removed and the NVR will work in fanless mode.
•STEP 8
NVRs
with PoE switch
are supplied with a 48Vdc power supply for the switch.
To connect PoE switch, follow the instructions below:
- connect the camera to the PoE switch;
- connect the 48Vdc power to the NVR dedicated port.
•STEP 9
For NVRs equipped with PoE switch: pay attention not to use the wrong connector for the power supply. The correct con-
nector is indicated by the arrow in the following image:
Users can also find information on the label stuck on the top side of the device.
Internal view with components positioned and correct wiring.
!!! IMPORTANT !!!
If no camera is connected to the PoE switch
we recommend to disconnect the power unit from 48Vdc PoE connector.
