090000938
-
NVR Serie BU
-
Quick Guide
39
Insert required data:
•IMPORTANT NOTE FOR THE USE OF E-VISION DDNS SERVICE AND M-EYE APPLICATION
Before proceeding with the
NVR
setup, the correct configuration of the router is required.
It will be necessary to open the router ports used by the
NVR
, that is, to configure a NAT between the
NVR
private IP and the router public dynamic IP on the port required. For the NAT, a TCP port with a
number greater than port 1024 must always be used.
Default ports 80, 5050 to 5053.
Now it will be possible to start IE browser and digit the string in the "URL di accesso" field on the label
above.
NVRs are supplied with a copy of the label above. The label can easily be kept with you (e.g. in
your wallet, bag, etc.) as memo in case the product or the manual are not at hand (e.g. on holiday.)
PUBLIC STATIC IP ADDRESS
OR URL (NO-IP, DYNDNS, ETC.)
5053
admin
(NO default password)
