090000938
-
NVR Serie BU
-
Quick Guide
21
Inserire i dati richiesti:
•NOTA IMPORTANTE PER L’UTILIZZO DEL SERVIZIO DDNS E-VISION E L’APPLICATIVO M-EYE
Prima di iniziare la programmazione del
NVR
, è necessario configurare correttamente il Router. Bi-
sogna cioè aprire sul Router le porte utilizzate dal
NVR
. In altre parole, si deve programmare una NAT
tra l'IP privato del
NVR
e l’IP pubblico dinamico del Router sulla porta desiderata. Nella NAT deve es-
sere sempre utilizzata una porta TCP con numero maggiore della porta 1024.
Porte di default 80, da 5050 a 5053.
A questo punto sarà possibile aprire il browser IE e digitare la stringa indicata nel campo etichetta URL
di accesso.
Nella dotazione del NVR troverete la fotocopia di un'etichetta come quella riportata sopra che
potrete conservare nel portafoglio come promemoria in caso non aveste prodotto o manuale
disponibili (esempio in villeggiatura).
INSERIRE UN IP STATICO PUBBLICO
O UN URL (NO-IP, DYNDNS, ECC.)
5053
admin
(nessuna password di default)