E.T. Systems DC BLUE ADVANCED Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 32

E.T. Systems DC BLUE ADVANCED Скачать руководство пользователя страница 2

ET DC BLUE ADVANCED INSTALLER 2012.025.12.05.2014

2

TABLE OF CONTENTS

Page

Category

Introduction

3

Safety obligations and general warnings.

4

Technical specifications.

5

Component identification and descriptions.

Hardware installation

6

Installing the clutch release mechanism on the sledge/traveller.

7

Sectional overhead door – Installing the wall mount bracket.

7

Sectional overhead door – Installing the drawbar and hanging straps.

8

Sectional overhead door – Installing the door mount bracket.

8

Sectional overhead door – Installing the link arm.

8

Sectional overhead door – Testing the mechanical drive and linkage.

9

Trackless tip-up door – Installing the wall mount bracket.

10  Trackless tip-up door – Installing the door mount bracket.
10  Trackless tip-up door – Installing the link arm and hanging straps.
10  Trackless tip-up door – Testing the mechanical drive and linkage.
11  Both door types  – Attaching the motor-head to the drawbar.
11  Both door types – Attaching the battery to the drawbar.
11  Both door types  – Supplying household mains power to the motor-head.

Control card wiring and setup

12  Wiring of optional extra devices  to the system.
13  Control panel dashboard and programming menu summary. (How to navigate the menu)
14  Programming - Open  and closed limit setup and door load profiling.
15  Programming - Setting the obstruction force sensing, safety level.
16  Programming - Activating safety beam mode.
17  Programming - Activating and selecting the auto-close time.
18  Programming - Selecting  an electric lock mode.

Receiver programming

19  Learning  a new transmitter button code into the receiver memory.
20  Clearing a single transmitter button code from the receiver memory.
21  Master  erasing  all transmitter button codes from the receiver memory.

22 Quick method of learning a transmitter button code into the memory without entering the

programming menu.

Operating

23  Basic operating features using the (BT)  button triggers.
25  Advanced  operating features  - Party mode.
26  Advanced  operating features  - Holiday lock-out mode.
27  Advanced  operating features  - Strike lock mode.
28  Advanced  operating features  - Magnetic lock mode.
29  Advanced  operating features  - Auto-close example.
29  Advanced features - Safety beam example.
30  Advanced features - Courtesy  light operation.

Troubleshooting

31 Buzzer, courtesy light and display warnings.

Warranty

32 Warranty terms and conditions.

«
1
2
3
4
...
»

Содержание DC BLUE ADVANCED

































Отзывы:

Нет отзывов