E.T. Systems DC BLUE ADVANCED Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 32

E.T. Systems DC BLUE ADVANCED Скачать руководство пользователя страница 16

ET DC BLUE ADVANCED INSTALLER 2012.025.12.05.2014

16

ACTIVATING SAFETY BEAM MODE.

Default – Off (Disabled)

NB! When auto-close mode is activated, the safety beam mode automatically becomes active.

This is mandatory as auto-close mode may never be used without a set of safety beams installed.

With auto-close active, safety beam setup mode is no longer available in the setup menu.

From Standby Mode

Action

Response

To enter the Program

menu. Press and hold SET

button until buzzer beeps

twice.

Display begins flashing

“P” and buzzer beeps

twice to confirm the

main program menu is

active.

Select safety beams

setup by scrolling up with

the UP button until “b”

flashes.

Display flashes “b” to

confirm safety beam

setup mode is selected.

Press and release SET

button to enter safety

beam setup.

Buzzer beeps once and

current beam status is

displayed.

0 = Off and 1 = On

Press and release the UP

button for On or DOWN

button for Off selection.

0 = Off (Disabled)

1 = On (Active)

Press and release the SET

button to save the new

setting to memory and

exit back to the main

program menu.

The buzzer beeps once

and the display returns to

flashing “P”.

OR

Scroll up or down

to next program

option.

OR

Press and release EXIT to

return to Standby mode.

«
...
14
15
16
17
18
...
»

Содержание DC BLUE ADVANCED

































Отзывы:

Нет отзывов