e-Line Technology SIBELL QDVR-SBE32, Руководство пользователя

Страница: 99 / 150

Alarm Management DVR User Manual
92
automatically. Configure the trigger alarm-out in the window. The system will
trigger the alarm-out automatically when the sensor alarm is triggered. You need to
set the delay time and the schedule of the alarm outputs. See
9.4.1 Alarm-out
for
details.
Preset: check it and then the “Trigger Preset” window will pop up automatically.
Configure the trigger preset of each camera. To add presets, please see
6.2 Preset
Setting
for details.
Buzzer: if enabled, the system will begin to buzz when the sensor alarm is triggered.
To set the delay time of the buzzer, please see
9.4.4 Buzzer
for details.
Pop-up Video: After camera setting, the system will pop up the corresponding video
automatically when the sensor alarm is triggered. To set the duration time of the
video, please see
9.4.3 Display
for details.
Pop-up Message Box: if enabled, the system will pop up the corresponding alarm
message box automatically when the sensor alarm is triggered. To set the duration
time of the message box, please see
9.4.3 Display
for details.
E-mail : if enabled, the system will send an e-mail when the sensor alarm is
triggered. Before you enable the email, please configure the recipient’s e-mail
address first (see
11.1.4 E-mail Configuration
for details).
Motion Alarm
Motion Alarm: when the motion object appears in the specified area, it will trigger
the alarm. You should enable the motion of each camera first and then set the
alarm handling of the camera to complete the whole configuration of the motion
alarm.
Motion Configuration
①
Click Start

Settings

Camera

Motion to go to the following interface.