e-Line Technology SIBELL QDVR-SBE32, Руководство пользователя

Страница: 10 / 150

Introduction DVR User Manual
3
Record Backup

Supports recorded video to be backed up through USB (U disk or portable drive) interface

Supports recorded video to be backed up by time/event/image search

Supports recorded video cutting for backing up video snippets when in play back

Supports a maximum of 10 backup tasks in background and backup

status viewing
Alarm Management

Supports alarm schedule settings

Supports enabling or disabling of motion detection, external sensor alarm input and
exception alarms including IP address conflict alarm, disk IO error alarm, disk full alarm, no
disk alarm, illegal access alarm, network disconnection alarm, IPC offline alarm and so on,
alarm trigger configuration is supported

Supports IP camera offline alarm trigger, configuration of PTZ, snap, pop-up video, etc.

Supports event notification modes of alarm-out, pop-up video, pop-up message box,
buzzer, e-mail and so on

The snapped images can be attached into the e-mail when alarm linkage is triggered

Supports alarm status view from alarm-in, alarm-out, motion detection and exception
alarm

Supports alarms to be triggered and cleared manually

Supports system auto reboot when exceptions happens
Network Functions

Supports TCP/IP and PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP protocol and so on

Supports the allow and block list function and the allow and block of the following can be
set, IP address/IP segment/MAC address.

Supports multiple browsers including IE8/9/10/11, Firefox, Opera, Chrome (available only
for the versions lower than 45) and Safari in MAC system

Supports remote achievement, configuration, import and export of the DVR parameters
and other system maintenance operations including remote upgrading and system restart

Supports remote camera configuration of the DVR including video parameters, image
quality and so on

Supports remote searching, playback, and backup of the DVR

Supports manual alarm to be triggered and cleared remotely

Supports NVMS or other compatible platform management software’s to access the DVR
and manage it from CMS.

Supports NAT function and QRCode scanning by mobile phone and tablets

Support mobile surveillance by phones or tablets with iOS or Android OS

Support DVR to be accessed remotely through telnet and the telnet function can be
enabled or disabled