e-Line Technology SIBELL QDVR-SBE32, Руководство пользователя

Страница: 100 / 150

Alarm Management DVR User Manual
93
②
Select the camera, enable the motion and set the sensitivity and duration of the
camera.
Sensitivity: the higher the value is, the more sensitive it is to motion. You should
adjust the value according to the practical conditions since the sensitivity is
influenced by color and time (day or night).
Duration: it refers to the interval time between the adjacent motion detections. For
instance, if the duration time is set to 10 seconds, once the system detects a
motion, it will go to alarm and would not detect any other motion (specific to
camera) in 10 seconds. If there is another motion detected during this period, it will
be considered as continuous movement; otherwise, it will be considered as a single
motion.
③ Drag the camera image to set the motion area. You can set more than one
motion area. Click “All” to set the whole camera image as the motion area. Click
“Reverse” to swap the motion area and the non-motion area. Click “Clear” to clear
all the motion areas.
④
Click “Apply” to save the settings. Click “Processing Mode” to go to the alarm
handling configuration interface of the motion alarm.