background image

2

EN

WARNING:

 Read the ENTIRE instruction manual to become familiar with the features of the 

product before operating. Failure to operate the product correctly can result in damage to 

the product, personal property and cause serious injury. 

This is a sophisticated hobby product. It must be operated with caution and common sense and 

requires some basic mechanical ability. Failure to operate this Product in a safe and responsible man-

ner could result in injury or damage to the product or other property. This product is not intended for 

use by children without direct adult supervision. Do not attempt disassembly, use with incompatible 

components or augment product in any way without the approval of Horizon Hobby, Inc. This manual 

contains instructions for safety, operation and maintenance. It is essential to read and follow all the 

instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly 

and avoid damage or serious injury.

Meaning of Special Language

The following terms are used throughout the product literature to indicate various levels of potential 

harm when operating this product:

NOTICE:

 Procedures, which if not properly followed, create a possibility of physical property damage 

AND a little or no possibility of injury.

CAUTION:

 Procedures, which if not properly followed, create the probability of physical property 

damage AND a possibility of serious injury.

WARNING:

 Procedures, which if not properly followed, create the probability of property damage, 

collateral damage, and serious injury OR create a high probability of superficial injury. 

Additional Safety Precautions and Warnings

Age Recommendation: 14 years or over.

 Not a toy. Not intended for use by children without direct  

adult supervision.
As the user of this product, you are solely responsible for operating it in a manner that does not endan-

ger yourself and others or result in damage to the product or the property of others.
This model is controlled by a radio signal that is subject to interference from many sources outside 

your control. This interference can cause momentary loss of control so it is advisable to always keep a 

safe distance in all directions around your model, as this margin will help to avoid collisions or injury.

 Never operate your model with low transmitter batteries.

• 

Always operate your model in open spaces away from full-size vehicles, traffic and people.

• 

 Carefully follow the directions and warnings for this and any optional support equipment (char-

• 

gers, rechargeable battery packs, etc.).
 Keep all chemicals, small parts and anything electrical out of the reach of children.

• 

 Moisture causes damage to electronics. Avoid water exposure to all equipment not specifically 

• 

designed and protected for this purpose.
 Never lick or place any portion of your model in your mouth as it could cause serious injury or 

• 

even death.

NOTICE

All instructions, warranties and other collateral documents are subject to change at the sole discre-

tion of Horizon Hobby, Inc. For up-to-date product literature, visit horizonhobby.com and click on the 

support tab for this product.

Содержание The Beast
















Отзывы: