E-FLITE Pulse XT 25e ARF, Инструкция по сборке

Страница: 3 / 36

Using This Manual
This manual is divided into sections to make assembly of the model easier to
understand and to provide breaks between each major section.
In addition, check boxes have been placed next to each step to keep track of
each step completed. Steps with a single circle ( Ο ) are performed once, while
steps with two circles ( Ο Ο ) indicate that the step will require repeating, such
as for a right or left wing panel, two servos, etc.
We recommend reading through the entire manual before beginning assembly
in order to familiarize yourself with the model and its assembly.
Preparation
Your Pulse XT 25e arrives prefinished and it is recommended that you take
time to properly prepare your work area. Clean off your work surface and lay
down a foam pad or blanket to protect the finish of your model.
This is also a good time to check through the list of required parts and tools
and obtain any items not on hand that you may need to complete the model.
Inspection
Before beginning assembly of your Pulse XT 25e, inspect the kit contents and
take an inventory of the parts. If any parts are missing, defective or damaged,
contact Horizon Hobby, Inc. for assistance.
Direct your email to: productsupport@horizonhobby.com or call
877-504-0233 toll-free to speak to a service technician.
Kit Contents
1. Left wing panel 7. Cowling
2. Right wing panel 8. Spinner
3. Fuselage 9. Forward and aft (float) landing gear
4. Horizontal stabilizer 10. Wheel pants
5. Vertical stabilizer 11. Pushrod set
6. Canopy
Not pictured:
- Accessory bag (cooling scoop, control hardware, hook and loop material)
- Wing parts bag (dihedral joiners, wing dowels and aileron pushrods)
- Hardware bag (bolts, screws, washers, spacers)
- Float mount spacers (4)
Product Registration
Register your product online at: www.e-fliterc.com/register/
3