Note
:.The.servo.openings.in.the.fuselage.are.
set.up.for.the.JR.SPORT
®
.(MN48).Mini.Servos.
2. Center the servo in the servo opening. Use a
1/16" (1.5mm) drill bit to drill the locations for
the servo mounting screws.
Radio Installation
Required Parts
• Fuselage
• Receiver
• Mini Servo (2)
• 6" Y-harness
Required Tools and Adhesives
• Drill
• Drill bit: 1/16" (1.5mm)
1. Install the servo grommets and brass eyelets
on the rudder and elevator servos following
the instructions provided with the servos or
radio system.
16