24
E-flite Enticement F3P Profile Assembly Manual
Motor Installation
Required Parts
Assembled airframe
Carbon firewall
Motor w/hardware
Speed control
Propeller
Hook and loop tape
Motor battery
Required Tools and Adhesives
Foam-safe CA
Foam-safe CA activator
Hobby knife
Phillips screwdriver: #0
1. Use foam-safe CA to attach the firewall to the
fuselage. The opening for the motor leads is on the
left-hand side of the aircraft from the pilots perspective
toward the bottom. (Make sure to locate the firewall as
pictured below.)
2. Use a hobby knife to remove the foam from the
firewall in the location for the motor leads and in the
center of the firewall as well.
3. Attach the motor mount to the firewall using the
hardware provided with the motor and a #0 Phillips
screwdriver.
