34
35
34
35
Transmitter and Receiver Binding
Binding is the process of programming the receiver to recognize the GUID (Globally
Unique Identifier) code of a single specific transmitter. If you ever find it is necessary
to replace the transmitter or the receiver/5-in-1 unit for your model, it will be
necessary for you to ‘bind’ the new transmitter or receiver/5-in-1 to your existing
transmitter or receiver/5-in-1 for proper operation.
The following steps outline the binding process:
• Make sure the flight battery is disconnected from the 5-in-1 unit and the transmitter
is turned off.
• Plug the flight battery into the 5-in-1 unit.
• Plug the flight battery into the 5-in-1 unit. After 5 seconds the LED on the 5-in1 unit
will begin flashing.
• After verifying the LED is flashing on the receiver/5-in-1, PUSH directly down on
the left-hand stick while switching the transmitter on (you will feel a ‘click’ when you
push in on the end of the stick).
• After approximately 5-10 seconds the receiver/5-in-1 should be bound to the
transmitter and you should now have full control and function.
If you encounter any problems, repeat the binding process again or call the
Horizon Support Team at 1-877-504-0233.
NOTES