28
29
28
29
Optional Training Gear Installation
If you are transitioning from a coaxial helicopter, or you are a beginner
helicopter pilot, you may consider installing the optional training gear designed for
your Blade mSR.
The training gear may help prevent excessive damage by keeping your helicopter as
level as possible in the event of a “bail out” (losing orientation and cutting the throttle
completely off).
The training gear is most effective when keeping the helicopter at or below 2 feet
and flown at low speeds. The training gear is not designed as a “force field” or
“protective armor” to help prevent any damage during a crash. However, it is a
great tool to help prevent damage to your helicopter when used properly.
• Slide one O-ring on each training gear rod
• Insert each training gear rod into the training gear hub
• Place training gear assembly under the helicopter above the skids, as shown in the
photo below
• Slide each O-ring over the landing gear skids to secure the training gear to the
helicopter