background image

42

43

42

43

Law: These Terms are governed by Illinois law (without regard to conflict of law 

principals).

Safety Precautions

This is a sophisticated hobby Product and not a toy. It must be operated with caution 

and common sense and requires some basic mechanical ability. Failure to operate 

this Product in a safe and responsible manner could result in injury or damage 

to the Product or other property. This Product is not intended for use by children 

without direct adult supervision. The Product manual contains instructions for safety, 

operation and maintenance. It is essential to read and follow all the instructions 

and warnings in the manual, prior to assembly, setup or use, in order to operate 

correctly and avoid damage or injury.

Questions, Assistance and Repairs

Your local hobby store and/or place of purchase cannot provide warranty support 

or repair. Once assembly, setup or use of the Product has been started, you must 

contact Horizon directly. This will enable Horizon to better answer your questions 

and service you in the event that you may need any assistance. For questions or 

assistance, please direct your email to [email protected], or call 

877.504.0233 toll free to speak to a service technician.

Inspections or Repairs

If this Product needs to be inspected or repaired, please call for a Return 

Merchandise Authorization (RMA). Pack the Product securely using a shipping carton. 

Please note that original boxes may be included, but are not designed to withstand 

the rigors of shipping without additional protection. Ship via a carrier that provides 

tracking and insurance for lost or damaged parcels, as Horizon is not responsible for 

merchandise until it arrives and is accepted at our facility. A Service Repair Request 

is available at www.horizonhobby.com on the “Support” tab. If you do not have 

internet access, please include a letter with your complete name, street address, 

email address and phone number where you can be reached during business days, 

your RMA number, a list of the included items, method of payment for any non-

warranty expenses and a brief summary of the problem. Your original sales receipt 

must also be included for warranty consideration. Be sure your name, address, and 

RMA number are clearly written on the outside of the shipping carton.

Warranty Inspection and Repairs

To receive warranty service, you must include your original sales receipt verifying the 

proof-of-purchase date. Provided warranty conditions have been met, your Product 

will be repaired or replaced free of charge. Repair or replacement decisions are at 

the sole discretion of Horizon Hobby.

Warranty Period

Horizon Hobby, Inc., (Horizon) warranties that the Products purchased (the “Product”) 

will be free from defects in materials and workmanship at the date of purchase by 

the Purchaser.

Limited Warranty

(a) This warranty is limited to the original Purchaser (“Purchaser”) and is not 

transferable. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS 

THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty covers only those 

Products purchased from an authorized Horizon dealer. Third party transactions 

are not covered by this warranty. Proof of purchase is required for warranty claims. 

Further, Horizon reserves the right to change or modify this warranty without notice 

and disclaims all other warranties, express or implied.

(b) Limitations- HORIZON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS 

OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE OF THE PRODUCT. THE PURCHASER ACKNOWLEDGES THAT 

THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE 

REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

(c) Purchaser Remedy- Horizon’s sole obligation hereunder shall be that Horizon 

will, at its option, (i) repair or (ii) replace, any Product determined by Horizon to be 

defective. In the event of a defect, these are the Purchaser’s exclusive remedies. 

Horizon reserves the right to inspect any and all equipment involved in a warranty 

claim. Repair or replacement decisions are at the sole discretion of Horizon. This 

warranty does not cover cosmetic damage or damage due to acts of God, accident, 

misuse, abuse, negligence, commercial use, or modification of or to any part of 

the Product. This warranty does not cover damage due to improper installation, 

operation, maintenance, or attempted repair by anyone other than Horizon. Return of 

any goods by Purchaser must be approved by Horizon before shipment.

Damage Limits

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL 

DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY 

CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIM IS BASED IN CONTRACT, 

WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. Further, in no event shall the liability 

of Horizon exceed the individual price of the Product on which liability is asserted. As 

Horizon has no control over use, setup, final assembly, modification or misuse, no 

liability shall be assumed nor accepted for any resulting damage or injury. By the act 

of use, setup or assembly, the user accepts all resulting liability.

If you as the Purchaser or user are not prepared to accept the liability associated 

with the use of this Product, you are advised to return this Product immediately in 

new and unused condition to the place of purchase.

Содержание EFLH3000

























Отзывы: