background image

GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY

 

No liability for printing errors. Technical changes reserved!    

 

 

 

03/2012

 

 

Operating instructions for the model U-16 Emden, Order No. 92303 

 

Description of the original 

The German Navy's U-16 submarine served as the design for this model. The model's length was shortened 
and a stern thruster was installed to optimize the model's maneuverability. 

Model description 

The  submarine's  real  static  dive  function  is  accomplished  with  a  hoist  motor  that  controls  a  ballast  tank.  The 
boat begins to submerge due to its increased weight. Surfacing takes place by the opposite effect. This makes it 
possible  for  the  model  to  be  suspended  in  water.  Curved  travel  is  accomplished  by  way  of  a  small  traverse 
thruster at the model's stern. This makes it possible for the model to turn in-place. 
The drive battery can be quickly and easily recharged because the switch socket is also the charger socket. 
The  submarine's  small  size  makes  it  possible  to  operate  it  without  difficulty  in  a  bathtub  or  a  rather  large 
aquarium tank. 

Technical data 

Length, about   

 

 

 

132 mm 

Breath, about   

 

 

 

33 mm 

Height, about   

 

 

 

50 mm 

Total weight with RC, about 

 

 

85 g 

Maximum diving depth, about   

 

0.5 m 

Important safety notices 

This  is  a  model  that 

–  together  with  appropriate  accessories  –  can  become  a  functional  RC  model. 

GRAUPNER/SJ  cannot  monitor  adherence  to  the  assembly  and  operating  instructions  for  the  model  nor  can 
GRAUPNER/SJ  supervise  the  installation,  operation  or  maintenance  of  the  model  and  its  components. 
Therefore GRAUPNER/SJ accepts no liability whatsoever for losses, damage or costs that arise from improper 
operation, improper behavior or which are associated with same in any manner. Unless mandated by prevailing 
law, the obligation of the GRAUPNER/SJ company to provide damage compensation arising from the use of the 
model,  regardless  of  the  grounds,  is  excluded  (this  exclusion  includes  personal  injury,  death,  damage  to 
buildings or structures as well as sales and business losses, consequential damage for business interruption or 
other direct and indirect consequential damages). 
Total liability under all circumstances and in each case is limited to the amount actually paid for this model. 
 
 

Summary of Contents for U-16 EMDEN









Reviews: