E-FLITE EFL9080, Инструкция по эксплуатации

Страница: 6 / 20

10 11 10 11
Please follow these steps to charge your single-cell Li-Po battery with the Celectra
4-port Li-Po charger.
FOR PORTABLE USE:
• Remove the cover on the bottom of the charger and install four D-size batteries (not
included), noting proper polarity. Replace the cover after the Alkaline batteries are
installed.
OR
• Use the included E-flite 6V, 1.5-Amp AC/DC Power Supply (EFLC1005/
EFLC1005AU/EFLC1005EU/EFLC1005UK).
NEVER attempt to power the charger from an AC outlet without the use of a proper
AC to DC adapter/power supply.
Note: When using the AC to DC adapter/power supply, the Celectra 4-Port Charger
is designed to bypass the D-size battery circuitry to prevent damage. Do not insert
charged or discharged Li-Po batteries in any of the charge ports if the power supply
is connected to the 4-port charger while power supply is not connected to a power
source. Doing so will discharge and possibly damage the batteries.
NEVER LEAVE THE ADAPTER/POWER SUPPLY OR CHARGER PLUGGED IN
UNATTENDED.
Celectra 4-Port Li-Po Charger Warning
Lithium Polymer (Li-Po) batteries are significantly more volatile than other
rechargeable batteries used in RC applications. Failure to read and follow these
instructions and safety precautions may result in fire, personal injury and damage to
property.
E-flite, Horizon Hobby, Inc., its retailers, and any other representatives, assume
absolutely no liability for use of this product or failure to comply with these
instructions and precautions.
If you are not prepared to accept complete liability for the purchase and/or use of
this product, you are advised to return it new and unused to the place of purchase
immediately.
Never ship batteries without the expressed permission of the recipient. Batteries
carrying a charge of 25% or more cannot be shipped safely. Batteries which are
damaged cannot be shipped safely. Damage or loss due to unsafe shipping is the
legal responsibility of the person who shipped the product.