E.F. Johnson Company 5100 ES, Руководство по эксплуатации

Страница: 152 / 212

7-16 ES Series Models II/III Portable Radio Operating Manual
Multi-Net Features
tells the system that the call is complete and prevents additional billing for the time
required by the system to automatically detect the end of the call.
7.10.2 Receiving a Special Call
Note When Radio Wide scanning is enabled, special calls are received on only the system of the
selected channel (see Section 4.11).
For Multi-Net users who would like the ability to answer phone and private calls without
entering into phone or private call mode first, an option may be enabled in the radio’s
codeplug. When the user receives a phone or private call, pressing the PTT switch will
answer the call. If the option is disabled, then the radio will continue to operate as it has,
with the user needing to enter phone or private call mode before being able to answer the
special call.
7.10.2.1 Telephone and Unit Calls
To receive a Telephone or Unit call, the system linked to the selected channel must have
that type of call enabled. For P25 Trunked/Conventional/Smartnet/SmartZone/Multi-Net
Telephone Calls, the Land Mobile Radio System must be connected to a telephone system.
Users should check with the System Administrator to see if Telephone Calls are allowed
on their system. When a Telephone call is received, “ringing” is heard, and when a Unit
call is received, three beeps sound.
To answer these calls, press the appropriate option button (Phone or Unit Call), press the
Call Reponse button or select the appropriate menu parameter, then press the PTT switch
and begin speaking. If special calls are to be answered but not placed, the Call Response
option button or menu parameter can be programmed and then pressed to answer these
calls. If the PTT switch is pressed without first pressing the applicable option button or
selecting the menu parameter, the radio keys on the selected channel and the special call is
ignored.
7.10.2.2 Directed Group Calls
To receive a Directed Group call, the home channel (system) and group ID of the call must
be selected or scanned or it must be on a priority or block ID as described in Section 7.2.1.
To respond to a Directed Group call, a channel programmed for that group ID may need to
be manually selected. No button is pressed as with other special calls. Since this call is
received as a standard group call, only voice of the calling party is heard and no ringing
occurs.