E.F. Johnson Company 5100 ES, Руководство по эксплуатации

Страница: 151 / 212

ES Series Models II/III Portable Radio Operating Manual 7-15
Multi-Net Features
2 Press the Up/Down button to scroll through the pre-programmed list of numbers. The
alias and number of each entry are alternately displayed. Highlight the desired number
and press the F2 button. Proceed to Step 5.
7.10.1.2 Entering Number Using Keypad
1 To place a Telephone Call, press and hold the Phone option button until a tone sounds
or select that menu parameter (see preceding section). With the menu mode, highlight
Enter No
and press the F2 button. When the phone mode is selected, is
displayed.
Likewise, to place a Unit or Directed Group call, press and hold the Unit Call option
button until a tone sounds or select the
Unit Call menu parameter and select Enter ID .
When the Unit call mode is selected, is displayed.
2 Enter the desired number using the 0-9 and # keys. Refer to Section 7.10.3 for
information on the numbers to dial.
3
To send the displayed or selected number, briefly press the PTT switch. A beep should
then sound to indicate that the number was accepted by the system. If this beep does not
sound, an unauthorized number may have been dialed or a dialing mistake may have
been made.
4 The various types of calls then proceed as follows. If the Proceed tone is enabled (see
Section 7.16), a triple beep tone sounds each time the PTT switch is pressed when
responding.
Telephone Call - The normal landside ringing or busy tone is heard. When the party
answers, press the PTT switch to talk and release it to listen as with standard calls.
Unique ID Call - A “ringing” tone is heard which indicates that the subscriber unit is
being rung. If there is no answer, ringing stops after several rings. When the party
answers, press the PTT switch to talk and release it to listen as with a standard call.
Directed Group Call -
A second beep sounds which indicates that the path to the
subscriber unit is complete and speaking can begin (no ringing of the other subscriber
unit occurs). Press the PTT switch to talk and release it to listen.
Note Since this transceiver operates half-duplex, you cannot hear the other caller while
transmitting or speak to the other caller while receiving.
System Busy Condition - If a system busy condition occurs, the call is placed in a
queue if Busy Queuing is enabled (see Section 7.15).
If Busy Queuing is not enabled, “BUSY” and the alias of the alias of the selected
number are alternately displayed. Additional retries can be made by manually pressing
the PTT switch. This mode is automatically exited after approximately two minutes of
no activity or it can be manually exited by changing channels or as follows.
5
When the call is finished, terminate it by pressing the F1 button or the key used to
select the call. Telephone calls can also be terminated by overdialing “#” or “* #”. This