E.F. Johnson Company 5100 ES Скачать руководство пользователя страница 109

Страница: 109 / 212

ES Series Models II/III Portable Radio Operating Manual

5-35

Conventional Mode Features

• A text message can be sent between radios on a digital channel with a repeater (if

repeater talk-around is enabled)

• The repeater in use is programmed for Repeated Data mode (not supported by EFJ 2600

repeaters)

If “Set R to R” is disabled:

• A text message can be sent between radios on a digital channel with a repeater if

PCTextMessage is connected to that repeater (all radios must be dynamically registered
to the repeater)

• A text message can be sent between a radio and PCTextMessage on a digital

conventional channel (if PCTextMessage is connected to that repeater)

5.16.2 Sending a Text Message

A text message can be sent to another radio or to a user of PCTextMessage, depending
upon the setup described in paragraph 5.16.1.

To send a text message:

Press the assigned text messaging button, or select text messaging from the menu. The
Messaging Entry list appears.

Select the desired message destination from the list:

- “Dispatcher” - the message will be sent to a user of PCTextMessage

- Unit ID - the message will be sent to the radio with the unit ID selected from the list

- “Dir Entry” - the message will be sent to the unit ID entered manually by the user

When the destination is selected, press the F2 button (or the PTT button). The Text
Entry screen appears.

Enter the text of the message:

- The “2” through “0” buttons scroll through the letters shown on their respective

nameplates

- The “1” button scrolls through symbols that can be inserted in the text string

- The “#” button inserts a space

- The “*” button is backspace

When the text message is fully entered, press PTT to send it.

If the message is to be routed via PCTextMessage, a message will be received that
acknowledges that the message has been forwarded.

Содержание 5100 ES





















































































































































































































Результаты поиска

Содержание 5100 ES

Отзывы:

Похожие инструкции для 5100 ES

Бренды по названию

Популярные бренды

E.F. Johnson Company 5100 ES, Руководство по эксплуатации

Результаты поиска

Содержание 5100 ES

Отзывы:

Похожие инструкции для 5100 ES

Бренды по названию

Популярные бренды