30
Operating instructions for EE310 Humidity / Temperature Transmitter
5.2 3.5” TFT Colour Display (optional)
The EE310 display includes a data logger and push buttons for full configuration of the device.
Upon start-up of an EE310 with display, the data logger and the configuration menu will be
initialised during the first 5 seconds.
For indoor use only.
1
2
3
4
5
Chart + data logger
Configuration menu
Status information
Buzzer ON / OFF
Error indication / information
Fig. 31
Display with push buttons
5.3 Chart + Data logger
The TFT display with the integrated data logging function saves all measured and calculated values to
the internal memory. The data logger has a real time clock (UTC time) with a battery back-up.
Changing the UTC time erases all stored data.
The data logger can save 20.000 values for each measurand. The logging interval is to be set by the
user from 1 second to 12 hours.
The data logger setup can be performed via display and push buttons.
Menu
Sampling rate
Data-logging
OFF
1 s / 10 s
1 min / 5 min / 15 min / 30 min
1 h / 5 h / 12 h
The data logger menu is also used to select the logged data to be shown as a graph as well as for scal-
ing the graph.
