Dynisco 1392 Series, Руководство пользователя, Страница: 21 / 44

21
Default: 19200
Serial Communication Byte Format “ bF ”
This parameter establishes the serial communication byte format
8E for 8 bits with even parity
8O for 8 bits with odd parity
8 for 8 bits with no parity
Default: no parity
Note: The configurator skips this section if serial communication is NOT implemented.
Analog Retransmission Type (Option) “ RO ”
This parameter establishes the analog output on the retransmission signal.
0.20 for 0 – 20mA
4.20 for 4 – 20mA
0.10 for 0 – 10V
0.5 for 0 – 5V
OFF for retransmission disabled
Default: 4 – 20mA (if option purchased)
Analog Retransmission Scaling: Low Scale Value “
Ar.L.S.U. ”
This parameter establishes the lower limit for the analog output.
The display alternately shows the Analog Retransmission Low Scale Value and a numerical
value. This parameter establishes the lower limit for the analog output; only the numerical value
is shown during modification. Resolution and decimal point position are as selected for the
readout value.
Default: 0.00
Analog Retransmission Scaling: Full Scale Value “
Ar.F.S.U. ”
This parameter establishes the upper limit for the analog output.
The display alternates between the Analog Retransmission Full Scale Value and a numerical
value. This parameter establishes the upper limit for the analog output; only the numerical value
is shown during modification. Resolution and decimal position are as selected for the readout
value.
Default: 10000
Analog Retransmission Filter “ rF ”
This parameter establishes the filter status on the retransmission value.
OFF for no filter on retransmitted value
xxx for filter having the time constant chosen in step C.
Default: OFF
When parameters have been selected, press
FUNC to lock in the paramter.
The configuration procedure is now complete and the display will return to show : “
COnF ”