Dynavision B Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 29

Dynavision B Series Скачать руководство пользователя страница 5

5

Access to the sensor data is based on standard TCP/IP and UDP Ethernet network
protocol allowing the DynaVision



B800 to be interfaced to many hardware and OS

platforms.

Each B800 sensor provides data for a 2 foot (610 mm) section (the length of each B800
sensor) of the material to be scanned. The sensors may be mounted above and below
the target (Top/Bottom scanning) or above the target only (Top only scanning).
Top/Bottom scanning allows true thickness measurements at each laser beam.  Top
only scanning provides thickness profiles at each laser beam relative to an arbitrary fixed
reference point.

The sensors are designed to be used in conjunction with the NetPowerHub (NPH) and
the MBstation which collects measurements from all installed heads and stores them for
use by the client’s computer.  A fully populated NetPowerHub permits top/bottom
scanner designs of up to 24 feet (6.1 m) and 48 feet (12.2 m) for top only systems.

The B800 sensor generates measurement samples at 2 kHz.  Each pulse generated by
an encoder connected to the NetPowerHub/MBstation, causes the current range
readings for all heads on the frame (scan line) to be collected.
B800 sensors are kept in synch with one another via a synchronization signal that is
transmitted from the NetPowerHub/MBstation to each sensor.  This ensures that the
range data sampled at the same point in time across the board.

The following components are available from LMI Technologies Inc.:
B800 sensors

laser-based distance sensors.

NetPowerHub/MBstation

Distributes individually fused power and serial
communications to the B800 heads.

B-series Software CD

CD-ROM containing software libraries, system
installation, diagnostic and demonstration
programs, and software documentation.

The following may be ordered directly from DNA Cables of Burnaby, BC, Canada
(ph: 604-439-1099) or LMI :

Integrated Power Cable

Connectorized cable for power and serial
communications.

«
...
3
4
5
6
7
...
»

Содержание B Series






























Отзывы:

Нет отзывов