Dynasound DS3002, Руководство пользователя

Страница: 32 / 35

System configuration files
Dynasound, Inc. 6439 Atlantic Blvd. Norcross, GA. 30071 800.989.6275
Alternate configurations and applications
Compatibility with other Products
Initial Installation and system configuration
Dynasound audio networking products use CobraNet™ and as such are compatible with CobraNet products from other pro
audio manufacturers. Such products include network audio amplifiers, network ready microphone jacks and more.
Dynasound audio networking products are controlled with industry standard SNMP technology permitting interface with a
variety of industrial control products. Contact tech support for more information.
As previously described, the standard network configuration is a DS3008 broadcasting to groups of DS8000s. There are
more possibilities. For example if no paging or music signals are required, an addressable network of DS8000s can be
used without a network broadcaster, still allowing for very precise soundmasking adjustment on a per speaker basis. The
soundmasking generators inside each DS8000 would be active in this scenario.
Additional DS3008 and DS3002 processors may also be used in complex networks to provide Analog to Digital or Digital to
Analog conversion used to introduce or extract audio signals to or from the digital audio network.
Before installing the soundmasking network you will require a drawing showing the location of DS8000s and speakers. In
the case of a new project being shipped the DS8000s will be pre-configured and labeled. This means they must be installed
in accordance with the drawings so that the system may be tuned and adjusted and so that the end user may manage the
system at a later date.
The factory IP address for DS3002 and DS3008 devices is 192.168.100.5 - Transmit Bundle Number 2 Rec 0
The factory IP address for DS8000 devices is 192.168.100.6 through 192.168.100.200 - Rec Bundle Number 2
Control devices such as PCs or touchscreen devices are normally 192.168.100.220 through 192.168.100.250
Contact Tech support if you have installation, relocation or system expansion questions.
The following files are located in the directory where Privacy Manager is installed.
The location is c:\Dynasound\PrivacyManager.
Four files contain configuration and IP settings: DSIControl.ini , Profiles.dat , SoftStart.dat , maskingSchedules.dat
Eight files contain the system pre-set definitions: Preset1.dsi , Preset2.dsi , Preset3.dsi , Preset4.dsi , Preset5.dsi ,
Preset6.dsi , Preset7.dsi and Preset8.dsi.
These files can be restored to the original status using the options shown on the previous page.
29