Dynasound, Inc. 6439 Atlantic Blvd. Norcross, GA. 30071 800.989.6275
Dynasound DS8000
The Dynasound DS8000 is a PoE (Power over Ethernet) network controlled
soundmasking/paging/music processor incorporating four soundmasking
generators, eight network audio inputs, eight 4-8 ohm speaker outputs and
a 12x8 matrix mixer allowing any combination of inputs and soundmasking
generators to be mixed to any of the eight speaker outputs.
In addition each network input has a dedicated 7 band equalizer. Each
soundmasking generator has separate 1/3 octave band EQ, high pass and
low pass filters.
The DS8000 is designed to accept network audio signals from a Dynasound
DS3008 or DS3002 soundmasking processor via standard network PoE
switches.
Physical installation of the DS8000
The DS8000 is shipped with hardware for either independent mounting or for attachment to speaker suspension wires. For
independent mounting the eyebolt can be used to suspend the speaker in the same manner as the Dynasound DS1356
speaker. For attachment to speaker hanging wires, the supplied “grid-wire” clip can be used.
Connecting speakers to the DS8000
The DS8000 provides eight speaker level outputs for connection to the Dynasound DS1356 speaker. Speaker connections
to the DS8000 are made with 2 conductor pluggable connectors. Wire should be minimum 18 gauge copper stranded.
NOTE: The DS8000 is NOT intended for use with DS1338 speakers or any other 70 volt speakers. The DS8000 is intended
for use with 4 through 8 ohm speakers only.
Connecting the DS8000 to the soundmasking network
The DS8000 is the first networked soundmasking system to be powered using Power over Ethernet (Poe). Connections are
made using standard Cat 5 cables. The network cable provides power and digital audio to the DS8000s.
DS8000
22
Содержание DS3002
Страница 2: ......
