Dynasound DS3002, Руководство пользователя

Страница: 17 / 35

14
Dynasound, Inc. 6439 Atlantic Blvd. Norcross, GA. 30071 800.989.6275
Receive bundle
Transmit bundle
The DS8000 screen (left) shows the soundmasking
signals coming in via bundle 2, input channels 7 and 8
and being routed to all eight output (speaker) channels.
The default receive bundle number for the DS8000 is 2.
The default transmit bundle number is 2.
These examples show a DS3008 (left) producing
soundmasking on generators A and B and broadcasting
it, via bundle 2, on outgoing channels 7 and 8.
Each Dynasound network device (DS3002, DS3008,
DS8000) has four internal soundmasking generators. The
default system configuration uses the generators internal
to the DS3008 or DS3002, broadcasting A-B masking on
channels 7-8 as shown below. Additional soundmasking
generators and spectrums may be utilized by employing
the generators internal to the DS8000s or broadcasting
additional soundmasking signals from the DS3008 on
audio channels 1 through 6.
The most common system configuration calls for a
DS3008 soundmasking processor used to introduce
audio signals into the CobraNet network. DS8000
speaker controllers are used to receive and route the
network audio bundles to any individual speaker or
group of speakers. The incoming and outgoing signals
are referred to as “bundles” instead of channels to avoid
confusion as each bundle contains 8 audio channels.
More than one DS3008 or DS3002 may be used to in-
troduce additional transmit bundles into the network al-
lowing up to 32 audio channels on a single system.
Device transmit and receive settings