Dynapac PL 1000 RS, Руководство по эксплуатации и техническому обслуживанию

Страница: 43 / 230

D 5
D_PL100
0RS_G
B
.f
m
5
-1
12
- 04.
07
Item Designation Short description
3 Steering wheel
Steering action is transmitted hydraulically to the front
wheel or wheels.
To allow for safe handling, the steering wheel is
equipped with a bracket handle.
4 Ignition lock
Key positions:
-
P: Active li hazard flasher can be engaged
- 0: Ignition OFF
- 1: Ignition ON
- 2: Starter function
It is only possible to start the engine if the drive
lever is in centre position, the milling drum is not
engaged and the switches for raising and lower-
ing the machine are in neutral position.
$
The engine cannot be started until indicator
lamps 38, 39, 40, 41, 42 go out.
Key can only be removed from ignition lock in
positions P and 0.
5
Multi-function
switch
Integrated flasher switch and switch for high-beam and
low-beam lighting, and horn button (6).
-
Use turn signals (flashers) to change direction of
travel on roads.
- High-beam headlights are switched on by pulling
the lever fully upwards. To switch back to low-
beam headlights, press the lever back down into
centre position.
6 Horn
If danger threatens and as an acoustic warning signal,
activate before setting off.
7
High beam indi-
cator (blue)
Lights up whenever high-beam is switched on (on igni-
tion lock).
Avoid dazzling oncoming traffic!
8
Direction of trav-
el indicator telltale Flashes whenever direction of travel indicator is acti-
vated.