manualshive.com logo in svg

Dynapac F1200C, Руководство по эксплуатации и техническому обслуживанию, Страница: 201 / 296

Поделиться
Скачать
Dynapac F1200C Скачать руководство пользователя страница 201

F 10 1

F 10

Maintenance

1

Notes regarding safety

Danger due to changes at the vehicle

Structural chances to the vehicle make the operating 
licence null and void and can cause severe to fatal injuries!
- Only use original spare parts and approved accessories.
- After maintenance and repair work, ensure that any dis-

mantled protective and safety devices are all completely 
fitted again.

- Comply with all further information in these instructions 

and in the safety manual.

Danger due to incorrect vehicle maintenance

Incorrectly performed maintenance and repair work can 
cause severe or fatal injuries!
- Ensure that maintenance and repair work is always only 

carried out by trained, specialist staff.

- All maintenance, repair and cleaning work should only 

be carried out with the engine turned off. Remove igni-
tion key and main switch.

- Affix a sign "Do not start" to the vehicle.
- Perform a visual inspection and check all functions 

every day.

- Proceed with all maintenance tasks according to the 

maintenance schedule.

- Proceed with expert inspection every twelve months.
- Eliminate all ascertained faults straight away.
- Do not restart the vehicle until all ascertained faults have 

been eliminated.

- Failure to comply with the prescribed inspection and 

maintenance work renders the operating licence null 
and void!

- Comply with all further information in these instructions 

and in the safety manual.

DANGER

DANGER

Содержание F1200C









































































































































































































































































































Отзывы:

Нет отзывов