Dynapac DRP15X, Руководство по эксплуатации

Страница: 88 / 112

Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Park the machine on level ground.
2. Park the machine safely
Ä
Chapter 6.5 „Parking the machine
in secured condition“ on page 60 .
3. Clean the area around the bleeding screw (1) and filling/drain
plug (2).
4. Tilt the machine slightly towards the oil drain side and secure
it properly.
5. Unscrew the bleeding screw.
6. Unscrew the filling/drain plug and collect any oil running out.
7. Tilt the machine to the opposite side and secure it properly.
NOTICE!
Components may get damaged!
Do not use low-ash engine oils for the exciter shaft
housing.
8. Fill in new oil.
9. Stand the machine horizontally and check the oil level.
ð
Nominal value: Bottom edge of filling/drain bore.
10. Clean the bleed screw (1) and filling/drain plug (2) and screw
them in with a low-strength sealing agent (e.g. spare parts
number: DL 009 700 16).
11. Dispose of oil in line with environmental regulations.
1 2
B-692-0009
Fig. 93
B-692-0010
Fig. 94
1 2
B-692-0011
Fig. 95
Maintenance – Annually
DRP15X 88