Dynapac DRP15X, Руководство по эксплуатации, Страница: 94 / 112

Protective equipment: n Working clothes
n Protective gloves
n Safety goggles
1. Park the machine in secured condition
Ä
Chapter 6.5
„Parking the machine in secured condition“ on page 60 .
2. Allow the engine to cool down.
3. Remove dried dirt with a suitable brush from all cooling fins
and cooling air intake openings.
4.
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(safety gloves, protective working
clothes, goggles).
Blow out the cooling fins and cooling air intake openings with
compressed air.
If the engine is oily, use a cold cleansing agent for cleaning.
NOTICE!
Components can be damaged by water
entering into the system!
– Do not direct the water jet directly into the air
filter, carburettor, recoil starter, air intake or
starter switch.
1.
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(safety gloves, protective working
clothes, goggles).
Spray the engine with a suitable, non-inflammable cleansing
agent, let is soak in for a while, clean it off with water and
blow out with compressed air.
2. Warm up the engine for a while to avoid corrosion.
3. Look for the cause of oily contamination and have any leaks
sealed by our customer service.
Fig. 112
Cleaning with cold cleansing agent
Maintenance – As required
DRP15X 94