Dynapac DRP15X Скачать руководство пользователя страница 100

Страница: 100 / 112

After shutting down store the machine under cover in a dry

and well ventilated room.

Cover the engine to protect it against dust and moisture.

A machine with conserved engine must be clearly marked by

attaching an information sign.

8.10.7.2

Measures before restarting

DANGER!
Danger to life caused by explosive gas-air

mixes!

–

Do not allow gasoline to come into contact with

hot components.

–

Smoking and open fire is prohibited.

–

Keep away from heat sources, sparks and

other sources of ignition.

–

Do not spill any gasoline.

Check the oil levels.

If the fuel was drained off before shutting down, you must

now fill in fuel.

Check hoses and lines for cracks and leaks.

Clean the machine thoroughly.

Start the engine and run it for 15 to 30 minutes with idle

speed.

Parking the machine

Maintenance – As required

DRP15X

100

Содержание DRP15X

















































































































Результаты поиска

Содержание DRP15X

Отзывы:

Dynapac DRP15X, Руководство по эксплуатации, Страница: 100 / 112

Результаты поиска

Содержание DRP15X

Отзывы: