Dynapac DFP12D Скачать руководство пользователя

Страница: 17 / 98

CAUTION!
Danger of injury if failing to comply!

Sections marked accordingly indicate a dangerous

situation that could lead to fatal or severe injuries,

if this warning is disregarded.

NOTICE!
Danger of material damage if failing to comply!

Sections marked accordingly indicate possible

dangers for machines or components.

Sections marked accordingly indicate technical

information or notes on using the machine or its

components.

ENVIRONMENT!
Environmental damage if failing to comply!

Paragraphs marked accordingly indicate practices

for safe and environment-friendly disposal of fuels

and lubricants as well as replacement parts.

3.1.3 Personal protective equipment

Depending on the work to be carried out, personal protective equipment is required (to be provided

by the operating company):

Working clothes

Tight fitting working clothes with low tear resistance, tight

sleeves and without any projecting parts protect against

being caught by moving components.

Safety shoes

To protect against heavy falling parts and slipping on

slippery ground.

Protective gloves

To protect the hands against excoriation, punctures or

deep injuries, against irritating and caustic substances

as well as against burns.

Concerning your safety – Basic prerequisites

DFP12D

Содержание DFP12D



































































































Результаты поиска

Содержание DFP12D

Отзывы:

Похожие инструкции для DFP12D

Бренды по названию

Популярные бренды

Dynapac DFP12D, Руководство по эксплуатации

Результаты поиска

Содержание DFP12D

Отзывы:

Похожие инструкции для DFP12D

Бренды по названию

Популярные бренды