Dynapac DFP12D, Руководство по эксплуатации

Страница: 88 / 98

3.
NOTICE!
Electric components can be damaged by
water entering into the system!
– Do not guide the water jet directly into the
cooling air openings of the recoil starter,
into the dry air filter or onto electrical
equipment.
Clean the machine with a water jet.
4. Warm up the engine for a while to avoid corrosion.
8.8.3 Cleaning the water spraying system
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Remove the cap (2).
2. Open the rotary button (1) completely and let all water run
out.
Alternatively you may also remove the water
tank for cleaning.
3. Flush the water tank with a strong water jet, until all dirt has
run out.
4. Fill the water tank with clean water and close the cap.
8.8.4 Measures prior to extended shut-down period
8.8.4.1 Measures before shutting down
If the machine is shut down for a longer period of time, e.g. winter
season, the following work must be carried out:
1. Clean the machine thoroughly.
2. Clean the water separator.
3. Fill the fuel tank with diesel fuel, to prevent the formation of
condensation water in the tank.
4. Change the engine oil and clean the oil filter.
5. Change the fuel filter.
6. After shutting down store the machine under cover in a dry
and well ventilated room.
7. Protect the cooled down engine against dust and moisture.
Fig. 91
1
2
B-230-0073
Fig. 92
Maintenance – As required
DFP12D 88